Yealink SIP-T48G Administrator's Manual page 92

Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
Local
Details of Configuration Parameters:
wui.http_enable
Description:
Enables or disables the user to access web user interface of the IP phone using HTTP
protocol.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTP
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->Webserver Type->HTTP Status
network.port.http
Description:
Configures the HTTP port for the user to access web user interface of the IP phone
using the HTTP protocol.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTP Port (1~65535)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->Webserver Type->HTTP Port
78
Web User Interface
Phone User Interface
Parameters
Configure the web access type,
HTTP port and HTTPS port.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
Configure the web access type,
HTTP port and HTTPS port.
Permitted Values
0 or 1
Integer from 1 to 65535
Default
1
80