Table of Contents
Advertisement
D*AP4
Setup GUI – SYSTEM – Firmware Update
The files to update the D*AP4 will be available in ZIP format. You must unpack them to your PC in order to
use them for the update procedure. Here an example path name from the ZIP file:
junger_dap4_mei_firmware/base_unit_image
The folder /base_unit_image contains an image file for the D*AP4 core system in the format (example):
"rel_dap4-mei_3_0_2-25852.img". The other folders contain update files for components, like the optional
interface boards in the format: "rsdi150_v51.sdi" or for the X*AP RM
xap_125105.img.
Setup GUI – SYSTEM – Reboot
Restore Factory defaults
Overwrite Current IP
IP Configuration
Will clean up the parameter and preset memory and will initialize all
parameters to their factory default values and will reset passwords
and turn authentication off.
You may exclude the current IP settings from this process
to keep your existing settings.
23
remote panel in the format:
1
To update the D*AP4,
you must
<Browse ...> to
find the respective
firmware file (which
you have unzipped
before) and press
<start update>.
After finishing the
procedure the device
will automatically
reboot.
You may also update
the firmware of an
installed SDI
(Interface 1) or AES
I/O (Interface 0).
Finally you can see the
options of your device
which you have bought
a license for. When
you buy a license you
must provide the
license info file and in
return you will get a
new license file which
you must apply to the
device here.
Advertisement
Table of Contents
