junger D*AP4 FLX User Manual page 4

Hardware Features
• 1RU
• Dual power supply
• Front panel info display
• Two hidden touch buttons
• Remote Panel
• Audio inputs
Audio o
• utputs
• One interface slot
• RJ45 network connector
• USB B connector
• 8 GPI/Os
• Aux power supply
• External sync IN
• Sync OUT
Software Features in general
The D*AP4 may be purchased as a Level Magic Edition and will appear as D*AP4 LM or based on the
software licenses of the FLX concept. In this case it appears as D*AP4 FLX.
Pls. contact your local dealer for details.
• LevelMagic
• Dynamic filter
• EQ
• Dynamics
• Fail over
• Voice over
• FM Conditioner
• Loudness measurement
• SNMP agent
• Remote control
Operating Manual
compact 19" processing device with front side info display
second power supply for redundancy
for signal activity, IP address, status alert
to change the content of the info display
optional X*AP RM panel
1
balance/unbalanced AES – manual selection
balance/unbalanced AES
I/O expansion slot for one option board at a time
100BaseT full duplex Ethernet interface
built in USB < > serial adapter to access the device service port
8 balanced inputs, 8 relay closure combined on a 25pin D-Sub
isolated 5V supply for external wiring
75Ohm input (Word Clock, AES, Black Burst, Tri-Level)
75Ohm Word Clock output
loudness management according to ITU BS.1770-1/-2/-3
EBU R128, ATSC A/85, ARIB TR-B32, Free TV OP-59, Portaria 354
optional SPECTRAL SIGNATURE™ dynamic EQ
optional 5 band parametric
optional compressor, expander / gate
optional automatic switch over with signal loss detection
optional stereo or mono voice over extra program input, pan
optional MPX limiter and Pre-Emphasis
in reference to the selected standard
SNMP v1, see D*AP4-MIB
EmBER plus protocol or X*AP RM1 remote panel, mobile UI
and legacy GPI/Os
DAP4-MEI_manual_EN_150817.doc
D*AP4