Setup Gui - Mesurement - Loudness - junger D*AP4 FLX User Manual

Setup GUI – MEASUREMENT – Loudness
The D*AP4 LM offers a sophisticated loudness measurement tool for the input and output of the
program path of the device. The three control buttons <pause>, <reset>, <reset max> may be used to
manually control the actual measurement. The pane shows the two measurement blocks for both
programs:
Loudness Mode
Current Measurement
Integrated Loudness (LUFS)
Loudness Range (LU)
Short-Term Loudness (LUFS)
Momentary Loudness (LUFS)
Short Term Max (LUFS)
Momentary Max (LUFS)
True Peak Max (dBTP)
Recent Measurement
Important Note! The measures of the parameters above depend on the loudness mode selected at
AUDIO PROCESSOR > Setup pane.
The measurement data may also be streamed to the J*AM (Junger Application Manager) to feed the
external loudness measurement and loudness logging tool. The J*AM is a PC software package that
one can download from the
loudness logging one must buy a hardware (USB) dongle.
[EBU R 128]
setting from AUDIO PROCESSOR > Setup > Loudness Mode
[hh:mm:ss]
Time elapsed since measurement started (excluding pauses)
numeric and convenient bar graph display
numeric and convenient bar graph display
[hh:mm:ss]
Total time of the recent measurement
Jungeraudio.com web site. To perform loudness measurement and
62
D*AP4