junger D*AP4 FLX User Manual page 16

Here is another example for page 2/2 after pressing the <Shift> button:
Input Delay Coarse [ms]
1/2
L/R
The D*AP4 knows two independent programs:
See SYSTEM > Setup > Program Configuration = 2 x 2. You can select between both
You are able to link / unlink the respective processing blocks (see AUDIO PROCESSOR > Input):
Input Link
V2 Unlinked
L/R Linked
The above example shows both channels of "Program 1" (default name) in Linked mode.
When you press hotkey #2 you are able to unlink both channels. Now you must simply push the rotary
encoder (or turn it counter clockwise / clockwise) to toggle between Linked and Unlinked condition.
In case of Unlinked, the display shows two independent parameter sets.
By pressing hotkey # 1
Input Link
L Unlinked
V2 R
The examples above demonstrates the general way how to setup parameters of the
AUDIO PROCESSOR of the D*AP4 VAP:
* Select a parameter
* Change it by using of the Rotary Encoder.
- Push it to toggle states
- Turn it to increment / decrement values.
Important Note! Not all processing blocks can be linked / unlinked. Carefully compare the settings via the
web GUI if you are not certain about individual settings. In general the X*AP RM
the GUI settings. To access all parameters of a function block you must sometimes use the <Shift> button.
E.g. the equalizer has 5 pages for one program channel!
Fine [samples]
0 0
On Mute
On off
you can toggle the between the channel that is under control:
On Mute
On off
On off
HPF [Hz] LPF [kHz]
OFF OFF
Gain[dB] Mono
0.0 Stereo
Gain[dB] Mono
0.0 Stereo
0.0
12
D*AP4
2/2
MENU
Program 1
ESC
here.
1/2
MENU
Program 1
ESC
1/2
MENU
Program 1
ESC
menus are a duplication of
1