Table of Contents
Advertisement
Setup GUI – AUDIO PROCESSOR – Delay
The D*AP4 has an independent audio delay that may be routed to any signal path inside the device.
Important Note! If the audio delay is routed into an internal signal path via the device routing matrix one
must add an initial delay of 27 samples.
Setup GUI – AUDIO PROCESSOR – Mobile UI
The D*AP4 provides an extra UI for live applications that may be used on tablets or mobile phones but
may also be displayed on a PC's web browser. When you click on the <Mobile> soft button in the upper
right area of the GUI above the <Help> button, a new tab in your current browser will open up.
But you can also use the URL: "<IP-address>/mobile" to open the operator UI elsewhere
(in a browser of a different PC or a mobile phone or a tablet). For mobile devices it requires network
integration of the D*AP4 via a WLAN.
Link
Delay
Output Delay
Coarse (ms)
Output Delay
Fine (samples)
60
D*AP4
[unlinked / linked]
defines the coupling of the
control circuits
[ON / OFF]
[0.0 ... 2000.0]
[
[0 ... 2000]
[
Advertisement
Table of Contents
