junger D*AP4 FLX User Manual page 15

D*AP4
Operating display – EBU R128 Meter
EBU R128 Int
[LUFS]
Input -19.3
Output -23.2
The meter style (ITU BS.1770-x / ATSC / EBU etc.) is defined by the settings of:
AUDIO PROCESOR > Level Magic > Loudness Mode (example is for EBU R12().
The above menu serves as a display of measurement values and offers the metering control buttons
(reset & pause / continue).
<ESC> returns to the main operating display.
Operating display – Audio Processor
Audio Processor
Input Phase
Rotator
<ESC> returns to the operating display.
This menu gives access to tweak the various function blocks. The active <Shift>
there is another page (2/2):
Audio Processor
Level FM
Magic Conditioner
The example below explains how to set parameters via the X*AP. E.g. if you press <Input>
all parameters for the input function block will be accessible:
Input Link
V2 L/R Linked
Here you are at the input
again toggles between two pages and gains access to the remaining parameters:
LRA Time
[LU] hh:mm:ss
6.4
5.8 00:12:15
reset
pause
TV3 HD
Fail De-Esser
Over
TV3 HD
On Mute
On off
section of the first program. The <Shift>
Short-Term Max TPL
[dBTP] Max
-19.7 -6.6 -12.0
-21.3 -5.0 -16.0
reset max
10.110.96.15
Spectral Equalizer Dynamics
Signature
10.110.96.15
Gain[dB] Mono
0.0 Stereo
11
Momentary
Program 1
1/2
Voice
Over
button indicates that
2/2
Output
1/2
Program 1
button
MENU
ESC
MENU
ESC
MENU
ESC
MENU
ESC