Technical Data - Option Board Madi I/O, Optical [O_Dap_Mo_Mm_A]; Technical Data - Option Board Madi I/O, Optical [O_Dap_Mo_Sm_A] - junger D*AP4 FLX User Manual

Digital audio processor
Table of Contents

Advertisement

D*AP4
General Features
Technical Data – Option Board MADI I/O, Optical [O_DAP_MO_MM_a, O_DAP_MO_SM_a]
Standards
Audio
Audio Sample Rate
Optical Input, LC
Optical Output, LC
BNC Output
General Features
Output voltage
Input cable equalizer for extended range and robustness
Reference grade word clock recovery, master-sync capable
Dedicated routing for non-processed channels, all channels
(max. 64) can be routed to/from the device or looped through
AES3 channel status management, non-audio detection
Relevant specifications comply with AES10-2008 and AES11-2009.
24bits, transparent forwarding of PCM and compressed audio
44.1, 48, 88.2, 9kHz, (88.2, 96kHz short framing)
64/56 channels @ 44.1 and 48kHz, 32/28 @ 88.2 and 96kHz
Processable by D*AP8: 16 channels @ 44.1, 48kHz
Processable by D*AP4: 8 channels @ 44.1, 48, 88.2, 96kHz
Connector type
Center wavelength
Input optical power
Cable length (max.)
64/56 channels @ 44.1 and 48kHz, 32/28 @ 88.2 and 96kHz
Processable by D*AP8: 16 channels @ 44.1, 48kHz
Processable by D*AP4: 8 channels @ 44.1, 48, 88.2, 96kHz
Connector type
Center wavelength
Output optical power
Optical and BNC output carry the same signal.
Impedance
Output voltage
Field-replaceable optical module (SFP)
Reference grade word clock recovery, master-sync capable
Dedicated routing for non-processed channels, all channels
(max. 64) can be routed to/from the device or looped through
AES3 channel status management, non-audio detection
Parallel outputs (BNC/LC) for media conversion
0.6Vpp (typ.) @ 75Ohm
LC (IEC 61754-20)
1310nm (typ.), 1270 ... 1360nm
[O_DAP_MO_MM_a]:
-31 ... -8dBm, OM2 multimode (50/125µm)
[O_DAP_MO_SM_a]:
-23 ... -8dBm, singlemode (9/125µm)
(standard values, others on request)
[O_DAP_MO_MM_a]: 1.5km, OM2 multimode
[O_DAP_MO_SM_a]: 2km, singlemode
(standard values, others on request)
LC (IEC 61754-20)
1310nm (typ.), 1270 ... 1360nm
[O_DAP_MO_MM_a]:
-23 ... -14dBm, OM2 multimode (50/125µm)
[O_DAP_MO_SM_a]:
-15 ... -8dBm, singlemode (9/125µm)
(standard values, others on request)
75Ohm
0.6Vpp (typ.) @ 75Ohm
77

Advertisement

Table of Contents
loading

This manual is also suitable for:

D*ap4 lm

Table of Contents