Operating - Menu Structure Of The X*Ap Rm1 Remote Panel; Operating - Menu Structure Of The X*Ap Rm1 Remote Panel - Operating Displays - junger D*AP4 FLX User Manual

Operating - menu structure of the X*AP RM
Power up display – may show up to four D*APx enabled for remote control for this X*AP RM
remote panel. The example below has just one D*AP4 unit [given name "TV3 HD"] attached for
remote control. The status is "connect" (i.e. you may connect with that device).
See X*AP RM1 manual for details.
Remote Panel select device to control
TV3 HD
10.110.96.13
connect
Pressing that button will connect with that D*AP4.
Now the X*AP RM
(this may take a few seconds). When finished the main operating display opens up:
EBU
S
-21.0
out
R128 ITU1770
From here you may fire pre-defined hotkeys and observe the loudness of the processed programs.
Because this is the main operating display, the <ESC> button lights
power up display is below the main operating display.
Pressing <ESC>
Operating – menu structure of the X*AP RM
When you press the <MENU> button, the upper operating display opens up:
Menu
Audio
Processor
When pressing the <ESC> button you will return to the main operating display.
remote panel
1
remote panel will gather all necessary information from that D*AP4 unit
1
Program 1
LUFS
Loudn Lim
D02
sends you back to the power up display (device selection).
remote panel – operating displays
1
TV3 HD
EBU R128
Meter
Program 2
-21.5
LUFS
Nicerizer
Limiter! [Panic 1
red to indicate that the
10.110.96.15
10
D*AP4
1
MENU
ESC
MENU
Panic 2]
ESC
MENU
ESC