Filter Menu; Setup Menu - junger Accent1 Operation Manual

5. OPERATION
5.8
Filter menu shows filter settings.
Adjustments are made by pushing and turning SELECT knob (see 5.1).
5.9
For opening, selection and setting of the UTILITY menus.
Adjustments are made by pushing and turning SELECT knob (see 5.1).
SETUP
push
Interface assignment
Link
Output format
Display adjustment
Fader setup
Tally setup
GPI setup
Software version
page 5-4 Operation manual accent2, chapter 5 -Operation-
FLT MODE DYNAMIC >>
ON PEAK
FLT: filter on/off
(by pushing SELECT knob, green LED in button
lits if function block is switched on)
MODE: low shelving / peaking / high shelving
DYNAMIC: dynamic filter mode on/off
>>: switches to second page
FREQ Q
20 0.4
FREQ: filter frequency 20...20.000 Hz
Q: filter Q-factor 0.4...9.9 (only for peaking filter)
RANGE: cut or boost -15.0...+15.0 dB
THRSH: threshold -50...0 dBFS (only for dynamic
filter mode)
for opening and selection of utitlity menus
FILTER MENU (filter button)
ON
RANGE THRSH
4.2 -32
SETUP MENU (setup button)
first page
second page