Table of Contents
Advertisement
D*AP4
Equalizer
Band 1
Filter Type
Frequency (Hz)
Gain (dB)
Q
Band 2 ... 5
The EQs offer two different peak modes:
Peak 1: The bell curves of the Peak 1 filter features constant quality (Q) over gain.
Q is defined at -3dB below peak. It does not change when altering gain.
Peak2:
The bell curves of the Peak 2 filter also features constant quality (Q) over gain.
But Q is defined at 50 % of gain. Subjectively the bell curve becomes sharper when
increasing gain, but this is only true for the lower 6-8dB of gain.
Graph
Permanently
Visisble
Link
[ON / OFF]
[OFF / Peak 1 / Peak 2 / Lo Shelf / Hi Shelf / Lo Cut / Hi Cut]
[20 ... 20000]
[-20.0 ... 20.0]
[0.4 ... 4.0]
similar parameters as Band 1
49
[ON / OFF]
The color code of the column
headerswill change depending on
the program selected for display
(see upper) display.
White color represents the
selected program. If you select
program 1 for example it
becomes white while
Program 1 is colored orange.
[Unlinked, Linked]
For stereo operation you may link
the setup parameters
Advertisement
Table of Contents
