Setup Gui - Events - Actions - Bypass Actions - junger D*AP4 FLX User Manual

D*AP4
Here you create the action!
You must give the action a name, select a trigger (from the Trigger Equation) and select the respective
Preset - Measurement - I/O and/or Bypass event.
Done ...
Setup GUI – EVENTS – Actions – Bypass Actions
The bypass action is bound to the <BYPASS> button of the X*AP RM
You must simply select "follow" or "-" for the setup field.
But it also allows you to turn the bypass of one, some or all function blocks on. You must simply tick the
check boxes in the right hand panel:
Trigger
Source
Lock Source
Force Trigger Active
Bypass Event
Programs
Input ... Output
The X*AP and / or manual selection
[ON / OFF]
The X*AP RM remote panel <BYPASS> button may be
1
disabled / enabled here.
[ON / OFF]
Force the bypass function from the GUI instead of the
X*AP RM remote panel <BYPASS> button.
1
Audio processing blocks of the respective program path.
[follow / -]
71
remote panel.
1