Advertisement
(7) The Sector number ?? message will then appear. Type the sector
number and press Enter. The dump list for the floppy disk will
be displayed.
(8) After a dump list appears on the screen, the Press number key
(1:up,2:down,3:end) ? message will appear.
1. Displays the next sector dump.
2. Displays a previous sector dump.
3. Displays the following message.
(9) If you type 1 the display will return to the message shown
after (4) above. If you type 2 the display will return to the
DIAGNOSTICS MENU.
MODEL:T1200H/HB
Page 3-42
3.21 SYSTEM CONFIGURATION
3.21.1 Program description
This program displays the following system configuration.
1. Memory size
2. Display type
3. Floppy disk drive number
4. Async port number
5. Hard disk drive number
6. Printer port number
7. Co-processor number
8. Expanded memory port number
3.21.2 Operations
After pressing 8 and Enter key to select from the DIAGNOSTICS MENU, the
following display will appear.
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³
SYSTEM CONFIGURATION :
³
³
* - 640KB MEMORY
³
* - LCD DISPLAY
³
* - 1 FLOPPY DISK DRIVE(S)
³
* - 1 ASYNC ADAPTOR
³
* - 1 HARD DISK DRIVE(S)
³
* - 1 PRINTER ADAPTOR
³
* - 0 MATH CO-PROCESSOR
³
* - 1EXPANDED MEMORY
³
³
PRESS [ENTER] KEY
Another dump (1:Yes/2:No) ?
³
³
³
³
³
³
³
³
³
³
³
³
Advertisement
