Advertisement
MODEL:T1200H/HB
Page 3-25
3.12 REAL TIMER TEST
Subtest 01
Real time
A new data and time can be input during this test when
the current data and time are displayed. Operations for
the test is as follows.
1. After executing the test, the following message will
2. If current date is not correct, input the current new
3. If current time is not correct, input the current new
Subtest 02
Real time carry
CAUTION: When this test is executed, the current data and time is
erased.
This test checks whether the real-time clock
increments the time displayed correctly (month, day,
year, hour, minute, second).
MODEL:T1200H/HB
Page 3-26
3.13 NDP TEST
Note:
This test cannot be run if there is no NDP mounted on the
system PCB.
appear.
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ REAL TIME TEST
³
³ Current date: XX-XX-XXXX
³ Current time: XX:XX:XX
³
³ Enter new date:
³
³ PRESS [ENTER] KEY TO EXIT TEST
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
date. Press the Enter, the Enter new time: message will
appear.
time. Press the Enter, return to the
the REAL TIME TEST.
901000 ³
³
³
³
³
³
³
³
subtest menu of
Advertisement
