Turning The Projector Off; Adjusting The Projector Position - Christie DHD635-GS User Manual

Turning the projector off

Power off the projector in preparation for inspection or maintenance.
1. To turn the projector off, on the IR remote keypad or built-in keypad press
A warning message appears on the displayed image.
2. To confirm your selection, press
If you do not press
projector remains on.

Adjusting the projector position

When you select a position for the projector, consider the size and shape of your screen, the
location of your power outlets, and the distance between the projector and the rest of your
equipment. Follow these general guidelines:
• Position the projector on a flat surface at a right angle to the screen. The projector (with the
standard lens) must be at least 3 feet (0.9 m) from the projection screen.
• Position the projector to the required distance from the screen. The distance from the lens of
the projector to the screen, the zoom setting, and the video format determine the size of the
projected image.
• Determine the lens throw ratio:
• Lens 1.22~1.53 (WU/HD)
• Lens 0.95~1.22 (WU/HD)
• Lens 1.52~2.89 (WU/HD)
• Lens 0.75~0.95 (WU/HD)
• Lens 2.90~5.50 (WU/HD)
• 360 degree operation (along the widest axis)
360°
GS Series 630-635 User Manual
020-001213-02 Rev. 1 (02-2018)
again.
again, the warning message disappears after three seconds and the
Installation
.
23