Assembly E: Side Panels; Replacing The Side Panels - Otto Bock Voyager Evo Service Manual

3) Pull the back padding up and off the hook-and-loop fastener on the back upholstery and remove it (see
Fig. 38).
4) Loosen the backrest straps and then fasten together with the desired tension (see Fig. 39).
5) Fit the back padding and secure it with the hook-and-loop fastener to the back and seat upholstery:
→ Place the kink in the back padding at the top. The "V" in the padding (see Fig. 40, item 1) shows exactly
where the kink is.
→ Pull the back padding flap tightly downwards.
→ Pull the part of the flap that can be fastened forwards and fasten tightly to the seat upholstery (see Fig. 41,
item 1).
INFORMATION: The part of the flap that can be fastened prevents sliding or falling through the
gaps between the straps and protects against draughts.
6) Fasten the seat pad and the seat cushion.

3.8 Assembly E: Side Panels

3.8.1 Replacing the Side Panels

1) Loosen the Allen head screws (see Fig. 42, item 1).
2) Replace the side panels.
3) Firmly tighten the Allen head screws (see Fig. 42, item 1).
Voyager evo
38
40
Service Work
39
41
Ottobock | 19