Replacing The Angle-Adjustable/Depth-Adjustable Footrest; Replacing The Footplate - Otto Bock Voyager Evo Service Manual

3.5.2 Replacing the Angle-Adjustable/Depth-Adjustable Footrest

1) Loosen the Allen head screws on both sides (see Fig. 14).
2) Replace the footrest.
3) Adjust the footrest (see Page 12 et seq.).
4) On both sides, tighten the Allen head screws to 8 Nm (see Fig. 14).

3.5.3 Replacing the Footplate

1) Loosen the Allen head screws on the footplate (see Fig. 15).
2) Remove and replace the footplate.
3) If applicable: Remove and replace the clamp bracket. In order to do so, bend open the clamp bracket as far
as possible and pull it off the tube. Slide the new clamp bracket onto the tube.
4) Preinstall the footplate with the Allen head screws.
5) Rotate the footplate to the desired angle.
6) Tighten the Allen head screws to 10 Nm.
Voyager evo
13
14
15
Service Work
Ottobock | 11