Rev 1.0 Jan.10
Login Settings
Changing the Administrator Password
Note: If you forget the Admin login password, you'll need to reset the device to its default
settings and go through the device setup. See
trator Password?" on page 99
1. Log in to the home page.
Advanced settings
2. Click
Device > Basic
3. Click
Admin Password
4. In the
numbers).
Automatic Login ("Remember Me")
If you enable automatic login:
•
Anyone who uses the computer will automatically be logged in to the home
page (as long as no one else has already logged in from another computer);
entering the administrator password is not required.
•
The timeout security feature is disabled — you will never be automatically
logged off.
To enable automatic login:
1. From the computer that you want to enable automatic login, log in to the
home page.
2. In the login area, select the
You can repeat the above steps on other computers; however, since only one
administrator can be logged in at a time, only the first person to display the home
page will be logged in.
Viewing Computers That Are Set to Automatically Log In as Administrator
1. Log in to the home page.
Advanced settings
2. Click
Device > Basic
3. Click
Remember Me Client List
4. Next to
Disabling Automatic Login For a Specific Computer
1. Log in to the home page.
Advanced settings
2. Click
Device > Basic
3. Click
Remember Me Client List
4. Next to
"What Do I Do if I Forgot the Adminis-
.
(
).
.
field, type the new password (1–20 characters/
Remember me
check box.
(
).
.
show list
, click
(
).
.
show list
, click
.
.
Settings
63