Table of Contents
Advertisement
Clear Spot 4G+ User Guide
54
5. When the installation is complete, reconnect to Wi-Fi. See
to Wi-Fi?" on page
Upgrade Firmware From a File
Use this option when you have an updated firmware file that you've, for example,
downloaded from the CLEAR or Sierra Wireless website.
Note: During installation of the update:
• DO NOT turn off or unplug the device.
• Your Wi-Fi and Internet connections won't be available.
When the installation is complete, you will need to reconnect to Wi-Fi. (See
I Connect to Wi-Fi?" on page 98
To upgrade the device firmware from a file:
1. Log in to the home page.
Disable Wi-Fi when connected via USB
2. Ensure
When Connected Through USB" on page
3. Ensure your device is connected to the power adapter or computer, through
the USB cable.
Advanced settings
4. Click
5. If you want to later confirm that the upgrade was successful, write down the
current version information (shown in
· Software version
· Firmware version (in the 3G section)
· Firmware version (in the 4G section)
Device > Basic
6. Click
7. [OPTIONAL]: Save the current configuration (recommended).
Export
a. Click
.
b. Save the file. Note the filename and path.
Browse
8. Click
next to the
file to upload to the device.
Update
9. Click
.
Please wait while the upgrade occurs; this may take several minutes. The
device LCD shows the upgrade status. The device will restart (possibly sev-
eral times).
Once the upgrade is complete, the LCD device shows the usual icons and text
(for example, the device name).
10. Compare the current version information (in
wrote down in step 5 to confirm that the upgrade was successful.
98.
).
(
).
Device > About
.
Update Firmware From File
"How Do I Connect
"How Do
is selected. See
"Disabling Wi-Fi
79.
):
field, and click the firmware
Device > About
) to the values you
2131352
Advertisement
Table of Contents
