Table of Contents
Advertisement
Clear Spot 4G+ User Guide
46
From this window you can:
•
Reset the data usage figures for the current billing cycle. (Click
•
Change the start day of the billing cycle (in the
microSD Card Information and Settings
The text next to the icon indicates whether the card is:
•
Enabled
•
Detected
•
Accessible by all ("shared") or only the administrator
•
Accessible with or without a password (security)
Click the icon to display the SD Card Information and Settings window. The
window displays:
•
The card status (see the above list)
•
Storage capacity of the card, and space available
When you're logged in, you can:
•
Enable or disable the microSD card slot. See
Slot" on page
49.
•
Set up access to the card. See
page
50.
Sounds Information and Settings
The sounds icon (
) shows whether the device speaker is on.
Icon
Description
The device speaker is on.
The device speaker is off.
Click the icon to display the Sounds window. The window displays:
•
Status of the device speaker (on or off).
•
If you're logged in: check boxes to enable or disable sounds for the following
events:
Internet connected
·
Internet disconnected
·
Low battery
·
— Useful as a reminder to charge the device.
System alerts
·
— When you hear the device beep, you can then use the
device LCD or the Alerts window to get information about the alert. See
"Alert Information" on page
Starts on day
"Enabling the microSD Card
"Setting Up Access to the microSD Card" on
43.
Reset
.)
list).
2131352
Advertisement
Table of Contents
