Reset To Factory Default Settings - Sierra Wireless AirLink ES Series Hardware User's Manual

Rev 4 Aug.15
• Press and release the Reset button on the ES Series device (see
on page 9).

Reset to factory default settings

To reset the ES Series device to the factory default settings, either:
• Press and hold the Reset button until all the LEDs turn greenish-yellow
(about 7–10 seconds). See
Or
• In ACEmanager, go to Admin > Advanced and click the Reset to Factory
Default button. For details, refer to the ALEOS Software Configuration User
Guide.
The ES Series device resets to the factory default settings and reboots. Once
the reboot is complete and the LEDs resume their normal operating behavior,
the reset is complete.
Startup and Configuration
Front Panel on page 9.
Front Panel
25