Rev 1.0 Jan.10
Note: If you're using Mac OS X 10.4.x, after you connect the device you may see a
warning message that your computer is running on UPS backup battery and that you
should perform a computer shutdown. You can continue with your work. To prevent this
message from being displayed, install the device driver. See
Connection" on page 31
1. Ensure the computer is turned on.
2. Insert the larger (USB) end of the USB cable into the computer.
3. Insert the other (Micro B) end of the USB cable into the USB connector on
the side of the device.
When charging, the LCD shows the animated icon
When the device is charged, the LCD shows
Power Button
Turning Your Device On
1. Ensure that:
· The device has a charged battery inserted.
— or —
· The device is connected to the power adapter or a computer (through the
USB cable), as shown in the drawing on
2. If the device LCD is blank, press and hold the power button
seconds.
Turning Your Device Off
•
Press and hold the power button
.
page
for 2 seconds.
Your Device
"Making a Tethered
.
.
19.
for two
21