Table of Contents
Advertisement
Rev 1.0 Jan.10
Automatically Checking for Updates
To specify how often the browser interface checks for updates:
1. Log in to the home page.
Advanced settings
2. Click
Device > Basic
3. Click
Check for Updates
4. In the
Tip:
When updates are available, an alert is shown in the browser interface. See
Information" on page 43
Manually Checking for Updates
Note: During installation of the update:
• DO NOT turn off or unplug the device.
• Your Wi-Fi and Internet connections won't be available.
When the installation is complete, you will need to reconnect to Wi-Fi. (See
I Connect to Wi-Fi?" on page 98
Checking for updates
1. Log in to the home page.
2. Ensure you're connected to 3G/4G.
Advanced settings
3. Click
Device > Basic
4. Click
Check for updates now
5. Click
whether updates are available.)
Installing the updates
If updates are available, after you've manually checked for updates:
1. Ensure your device is connected to the power adapter or computer, through
the USB cable.
Note: If you'll be using USB for data transfer (and not just for charging the device), you
must install the device driver. See
Update options
2. Click
3. Read the information in the Software Installation Options window.
4. To install the updates, click
— or —
If you are not in a strong signal area, make a note of the URL displayed in the
I'll get the update later
window and click
download the update to your computer, and then follow the steps in
Firmware From a File" on page
(
).
.
list, click an option.
.
).
(
).
.
. (The message next to the button indicates
"Making a Tethered Connection" on page 31
.
Download and install now
. At a later time, access the URL to
54.
Using Your Device
"Alert
"How Do
.
.
"Upgrade
53
Advertisement
Table of Contents
