Table of Contents
Advertisement
Clear Spot 4G+ User Guide
Power button
Not lit
Lit, flashing
(approximately every
4 seconds)
Lit, flashing
(approximately every
30 seconds)
Type of press
Quick press
Quick double-press
Long press (press and hold
for two seconds)
22
Using the Power Button to Determine the Device State
The power button
the following table.
Description
•
The device is turned off, and may or
may not be charging.
•
The device is turned on, but you have
turned off the LED.
The device is turned on, and the LED is
enabled.
The device is in standby (low power) mode.
The following are off: LCD, Wi-Fi radio, 3G/
4G radios.
For more information, see
Power) Mode" on page 45
Controlling the Device Using the Power Button
Result
•
The device leaves standby (low power) mode.
•
The LCD wakes up (turns on) if it was enabled but dormant. (The LCD turns dark,
after a configurable time of inactivity.)
•
A displayed message is confirmed or acknowledged.
•
Display of the Wi-Fi network name (SSID) and password is turned off.
•
The LCD wakes up (turns on) if it was enabled but dormant. (The LCD turns dark,
after a configurable time of inactivity.)
•
The Wi-Fi network name (SSID) and password are briefly displayed. See
Password Reminder" on page 76
The device turns on or off.
on the device also indicates the device's status, as shown in
Your action
•
To turn the device on, press and hold the
power button
•
[OPTIONAL]: Turn on the LED. See
"Enabling and Disabling the LED" on
page 60
No action required.
To exit standby mode:
Connect the device to the power adapter or
computer, through the USB cable.
"Standby (Low
— or —
.
Press the power button
.
for two seconds.
.
.
"Wi-Fi
2131352
Advertisement
Table of Contents
