Table of Contents
Advertisement
Rev 1.0 Jan.10
Resetting the Software to Default Settings
Warning:
If you reset the software to default settings:
• You must go through the device setup (
• Any changes you've made to the settings are lost.
Your 3G and 4G account information is not affected; after reset, the device remains provi-
sioned for service.
You'll need to reset the software to default settings if:
•
You've forgotten the administrator password.
•
You've changed the DHCP settings such that the device is inoperable (for
example, there's no communication with the device).
You have two options to initiate the reset:
•
Through the software. See
(Through the Browser Interface)" on page
•
Through the reset button on the device. See the following section.
Resetting the Software to Default Settings (Through the Reset Button)
1. Remove the battery compartment cover.
2. Find the small hole below and to the right of the battery compartment. The
reset button is inside this hole.
page 25
), as if you've just purchased the device.
"Resetting the Software to Default Settings
92.
Reset button
Settings
91
Advertisement
Table of Contents
