Table of Contents
Advertisement
Clear Spot 4G+ User Guide
88
Port Trigger Panel
Some applications require multiple ports open for communication, many of which
may be initiated by a computer on the WAN. Examples of this include video
conferencing, VoIP (Internet telephony), and Internet gaming.
With port triggering, the device monitors outgoing data on specific port numbers
(trigger ports).
The device keeps track of the IP address of the computer that sends data on
these trigger ports, so that when incoming data on the Forward ports arrives, the
device sends the incoming data to the same computer.
Before you can use or configure port triggering, you must enable it. See
Port Triggering" on page
Port Trigger
From the
panel of the
can:
•
Enable port triggering for specified protocols and ports. See
Triggering for Specified Protocols and Ports" on page
•
Remove protocols and ports from the port triggering list. See
Ports from the Port Triggering List" on page
Enabling Port Triggering
Before you can use or configure Port Triggering, you must enable it.
1. Log in to the home page.
Advanced settings
2. Click
Router > Basic
3. Click
.
Port Triggering
4. Next to
Enabling Port Triggering for Specified Protocols and Ports
1. Ensure you've enabled port triggering. See
page
88.
2. Display the "Port trigger" window.
a. Log in to the home page.
Advanced settings
b. Click
Router > Port Trigger
c. Click
3. In the last row of the table, in the first
the application for outgoing traffic (to the Internet, sent through the trigger
ports).
Trigger Ports
4. In the
field, enter the port number(s) used to determine that the
application is in use (that is, specify the port number or range of port numbers
that the application uses for outgoing traffic). (Check the user documentation
for the application.)
To specify a range of port numbers, separate the start and end port number
with a hyphen.
Protocol
5. In the second
incoming traffic (from the Internet).
88.
Router
tab of the
89.
(
).
Enable
, select
.
"Enabling Port Triggering" on
(
).
.
Protocol
list, click the protocol(s) used by the application for
"Enabling
Advanced Settings
window, you
"Enabling Port
88.
"Removing
list, click the protocol(s) used by
2131352
Advertisement
Table of Contents
