Table of Contents
Advertisement
Section 4E
Login Settings
Changing the Administrator Password (page 80)
Automatic Login ("Remember Me") (page 80)
Changing the Administrator Password
Note:
If you forget this password, you'll need to reset the device to its default settings and go through the
device setup. See "What Do I Do if I Forgot the Administrator Password?" on page 127.
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Device > Basic
4.
In the
Admin password
Automatic Login ("Remember Me")
If you enable automatic login:
●
Anyone who uses the computer will automatically be logged in to the home page (as long as no
one else has already logged in from another computer); entering the administrator password is not
required.
●
The timeout security feature is disabled — you will never be automatically logged off.
To enable automatic login:
1.
From the computer that you want to enable automatic login, log in to the home page.
2.
In the login area, select
You can repeat the above steps on other computers; however, since only one administrator can be
logged in at a time, only the first person to display the home page will be logged in.
Viewing Computers That Are Set to Automatically Log In as Administrator
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Device > Basic
4.
Next to
Remember me clients list
80
Login Settings
button.
.
field, type the new password (1–20 characters/numbers).
Remember me
.
button.
.
, click
Show list
.
Advertisement
Table of Contents
