Using Your Device; Connecting Through Usb; Tru-Install; Requirements For A Usb Tethered Connection - Sierra Wireless Clear Spot 4G+ User Manual

4

4: Using Your Device

Connecting Through USB

TRU-Install

TRU-Install™ is a Sierra Wireless feature that installs the necessary
drivers the first time you connect the device to your Windows or Mac
computer through the USB cable. (For details, see "Making a
Tethered Connection" below.) An installation CD is not required.
By default, TRU-Install is enabled.
To change the setting:
1. Ensure you're logged in to the home page.
Advanced settings > Device > Basic
2. Click .
TRU-Install
3. Select a value for .

Requirements for a USB Tethered Connection

Your device supports a direct connection through a USB cable to a
Windows or Mac computer. (This is commonly referred to as a
"tethered" connection.)

Making a Tethered Connection

Note: If you'll be using USB for data transfer (and not just for charging the
device), you must install the device driver (see below). No installation CD is
required — the device supports the Sierra Wireless TRU-Install feature.
Rev 1.0 Jan.10 31