Configuring The Router Tab; Basic Panel - Sierra Wireless Clear Spot 4G+ User Manual

Rev 1.0 Jan.10
Reset Device to Factory Defaults
4. Click
5. When prompted, enter the SPC (Service Programming Code). (If you don't
know your SPC, contact CLEAR.)
You won't be able to establish a data connection until you:
1. Go through the device setup
2. Go through 3G activation or, if using 4G, use pay-as-you-go.

Configuring the Router Tab

You can configure the routing hardware component of the device through the
Advanced Settings
window.
1. Log in to the home page.
Advanced settings
2. Click
Router
3. Click .
4. Depending on the settings you want to configure, click one of the panels:
Basic
• . See "Basic Panel" on page
LAN
• . See "LAN Panel" on page
Port Forward
• . See "Port Forward Panel" on page
Port Trigger
• . See "Port Trigger Panel" on page
DMZ
• . See "DMZ Panel" on page

Basic Panel

1. Log in to the home page.
Advanced settings
2. Click
Router > Basic
3. Click .
From this window, you can enable or disable these features, or perform these
actions:
Port forwarding
• . See
Port triggering
• . See "Port Trigger Panel" on page
DMZ
• . See "DMZ Panel" on page
UPnP
• (universal plug and play). See
page 81.
SPI
• (stateful packet inspection). See
page 82.
Router Settings Reset
•
the Software to Default Settings (Through the Browser Interface)" on page
UPnP (Universal Plug and Play)
UPnP provides simple and robust connectivity among consumer electronics,
intelligent appliances, and mobile devices from many different vendors. For more
information, see www.upnp.org.
.
(page 25).
( ).
81.
82.
89.
( ).
"Port Forward Panel" on page
89.
"UPnP (Universal Plug and Play)" on
"SPI (Stateful Packet Inspection)" on
— Reset the software to default settings. See
Settings
86.
88.
86.
88.
"Resetting
92.
81