Table of Contents
Advertisement
Rev 1.0 Jan.10
Enabling Port Forwarding for an Application
1. Ensure you've enabled port forwarding. See
page
86.
2. Display the "Port forward" window.
a. Log in to the home page.
Advanced settings
b. Click
Router > Port Forward
c. Click
3. In the last row of the table, click the
type from the list.
Start
The values for
4. If necessary, change the range of port numbers associated with the appli-
cation. Traffic will be allowed (not blocked) if its destination port number is in
the specified range.
Start
a. In the
field, enter the number that starts the port range.
End
b. In the
field, enter the number that ends the port range.
If the range consists of only one port, enter the number that you entered
Start
in the
field.
Protocol
5. In the
list, click the protocol(s) used for this application (TCP, UDP, or
both).
IP Address
6. In the
field, enter the IP address of the server to be accessed.
Enable
7. Ensure
is selected.
Add
8. Click
.
save
9. Click
.
Disabling Port Forwarding for an Application
1. Ensure you've enabled port forwarding. See
page
86.
2. Display the "Port forward" window.
a. Log in to the home page.
Advanced settings
b. Click
Router > Port forward
c. Click
3. To keep the application in the list (in case you want to re-enable port
forwarding later on), clear the
— or —
To remove the application from the list:
a. Click the row that you want to remove.
A row of buttons (
Delete
b. Click
.
(
).
.
Application
End
and
ports are automatically filled in.
(
).
.
Enable
check box.
Delete
OK
Cancel
,
,
) appears.
"Enabling Port Forwarding" on
field, and select the application
"Enabling Port Forwarding" on
Settings
87
Advertisement
Table of Contents
