Login Settings; Changing The Administrator Password; Automatic Login ("Remember Me") - Sierra Wireless Overdrive Pro User Manual

Section 5E

Login Settings

Changing the Administrator Password (page 75)
Automatic Login ("Remember Me") (page 75)

Changing the Administrator Password

Note: If you forget the Admin Login password, you'll need to reset the device to its default settings and go
through the device setup. (See "What Do I Do if I Forget the Administrator Password?" on page 121.)
1.
Log in to the home page.
2.
Click Advanced settings > Device > Basic
3.
In the
Admin Password

Automatic Login ("Remember Me")

If you enable automatic login:
●
Anyone who uses the computer will automatically be logged in to the home page (as long as
no one else has already logged in from another computer); entering the administrator
password is not required.
●
The timeout security feature is disabled — you will never be automatically logged off.
To enable automatic login:
1.
From the computer that you want to enable automatic login, log in to the home page.
2.
In the login area, select the
You can repeat the above steps on other computers; however, since only one administrator can
be logged in at a time, only the first person to display the home page will be logged in.
Viewing Computers That Are Set to Automatically Log In as Administrator
1.
Log in to the home page.
2.
Click Advanced settings > Device > Basic
3.
Next to Remember me Client List
Disabling Automatic Login For a Specific Computer
1.
Log in to the home page.
2.
Click
Advanced settings > Device > Basic
3.
Next to Remember Me Client List
4.
In the row for the computer that you want to disable automatic login, click
.
field, type the new password (1–20 letters, numbers, or symbols).
Remember me check box.
.
, click show list .
.
, click show list .
.
Remove
Settings 75