Table of Contents
Advertisement
Rev 1.0 Jan.10
Software Update Available
The update may improve performance and add or modify features.
Note: During installation of the update, your Internet and Wi-Fi connections won't be
available.
When the installation is complete, you will need to reconnect to Wi-Fi.
To install the update:
1. Ensure your device is connected to the power adapter or computer, through
the USB cable.
Note: If you'll be using USB for data transfer (and not just for charging the device), you
must install the device driver. See
Admin Login
2. In the
section (in the upper left area of the home page), enter the
administrator password (1–20 characters/numbers). (The default password is
"password".)
OK
3. Click
.
4. Click the alerts icon to display the alert window.
5. If more than one alert is available, use the
alert window) to browse to the "3G Activation Required" alert.
6. In the Software Update Available alert window, click
7. Read the information in the Software Installation Options window.
8. To install the updates, click
— or —
If you are not in a strong signal area, make a note of the URL displayed in the
I'll get the update later
window and click
download the update to your computer, and then
File" on page
54.
9. When the installation is complete, reconnect to Wi-Fi. See
to Wi-Fi?" on page
Your Network Connection
Launching Your Network Connection
After the device powers on and boots up, a connection to the 3G/4G network is
launched automatically, unless you've disabled
You will need to manually launch a connection if:
•
The connection was not successful.
•
You've disabled auto-connect.
•
You've manually ended a connection (by clicking
"Making a Tethered Connection" on page 31
Download and install now
. At a later time, access the URL to
98.
Using Your Device
and
buttons (at the top of the
Update Options
.
.
"Upgrade Firmware From a
"How Do I Connect
Connect Automatically
.
Disconnect
).
.
39
Advertisement
Table of Contents
