4.3.3 IEEE802.1X Settings (KX-UT248 only)
4.3.3 IEEE802.1X Settings (KX-UT248 only)
This screen allows you to configure settings relating to the IEEE 802.1X networking protocol.
4.3.3.1 IEEE802.1X Settings
Enable IEEE802.1X
Description
Value Range
Default Value
Configuration File Reference
4.3.3.2 IEEE802.1X Authentication
Authentication Protocol
Description
Value Range
Default Value
Configuration File Reference
86
Administrator Guide
Selects whether to use the IEEE 802.1X protocol.
Note
•
You cannot set this parameter if [Enable VLAN] is set to
[Yes].
•
Yes
•
No
No
IEEE8021X_ENABLE (Page 195)
Specifies the authentication method used with the IEEE 802.1X
protocol.
Note
•
You cannot set this parameter if [Enable VLAN] is set to
[Yes].
•
EAP-MD5
•
PEAP
EAP-MD5
IEEE8021X_AUTH_PRTCL (Page 196)
Document Version
2012-06