Arctic Cat Cougar Service Manual page 364

354
g. Allow the bonding material to cure at room
temperature for 24 hours.
15. If necessary, remove and install the small
bearing as follows:
a. Remove the snap ring.
CHAPTER THIRTEEN
b. Use the proper size driver and drive the
bearing from the sliding sheave.
c. Use a piloted driver of the proper size and
drive the bearing into the bore.
d. Install the snap ring.
DRIVEN PULLEY
(1997 ZR 580)
1. Snap ring
2. Washer
3. Key
4. Torx-head screw
5. Spring
6. Torque bracket (cam)
7. Cover
8. Washer
9. Sliding sheave
10. Screw
11. Adjusting arm
12. Washer
13. Cover
14. Fixed sheave
15. Torsion spring
16. Adjusting plate
17. Torx-head screw