Arctic Cat Cougar Service Manual page 285

ELECTRICAL SYSTEM
9. Tighten the puller screw and break the fly-
wheel free of the crankshaft taper. It may be
necessary to tap the center screw of the puller
sharply with a hammer to jar the flywheel loose.
Do not hit the flywheel.
10. Remove the flywheel and the puller assem-
bly, then remove the puller from the flywheel.
275
11. Remove the Woodruff key (Figure 14) from
the crankshaft.
12. Clean the tapered surfaces of the flywheel
and crankshaft. The surfaces must be dry and
clean when installing the flywheel.
13. Check the flywheel magnets (Figure 15) for
metal that may have been attracted while the
IGNITION SYSTEM
(ZR 440, ZL 500 AND ZR 600 EFI)
1. COl unit
2. Ignition coil
3. Spark plug cap
4. Ignition timing sensor
5. Clamp
6. Screw
7. Allen screw
8. Stator plate
9. Stator
10. Screw
11. Key
12. Screw
13. Flywheel
14. Washer
15. Lockwasher
16. Nut
®