Set Menu; Status Options - High End Systems Shapeshifter C1 User Manual

CHAPTER 3
Menu System

Set Menu

The Set Parameters menu lets you configure your fixture's motion, display, and data source
settings.
To enter the Set menu:
1. Press the MODE/ESC button to enter the first level of the menu system. The display will
MODE
/ ESC
show Address and Info as the first two options in the top menu level.
*
The red star indicates the current option.
2. Using the
3. Press the button to select.

Status Options

This menu lets you configure various fixture functions. To set a status option:
1. Navigate to and select the Set menu as shown above.
2. Using the
3. Using the
to select.
4. Using the
return to the last menu level.
No DMX Mode
This option determines the fixture state after the DMX signal is removed. The Default setting is
Hold : You can choose from the following options:
CloseShutter: Closes shutter when DMX is removed
Hold: Holds the current values for all parameters
Auto Program: Reverts to Auto Program Playback
Music Ctrl: Reverts to Music Control Playback
Pan Reverse
This menu option inverts the direction of the pan motor to coordinate movements between
fixtures mounted opposite each other horizontally.
The default setting is Off. Select On to invert the fixture's Pan motion.
Tilt Reverse
This menu option inverts the direction of the tilt motor to coordinate movements between fixtures
on a link facing each other vertically.
The default setting is Off. Select On to invert the fixture's Tilt motion.
24
buttons, scroll to Set.
buttons, scroll to Status and press the
buttons, scroll to one of the status options below and press the
buttons, scroll to the desired setting and press
button to select.
to select or
MODE
/ ESC
SHAPESHIFTER User Manual
button
to