Set Menu - High End Systems SolaFrame 3000 User Manual

Set Menu

Set the Status Options
Navigate: Main Menu → Set → Status
Parameter
No DMX Mode
Pan Reverse
Tilt Reverse
Pan Degree
Encoders
Pan/Tilt Spd
Hibernation
Defogger
Dimming Mode
Out Rig Mode
Configure the Fixture
Value
Close
•
Hold
Control mode when DMX is absent. The default
•
value is Hold.
Auto
•
Music
•
ON
Reverse the pan movement of the fixture. The
•
default value is Off.
OFF
•
ON
Reverse the tilt movement of the fixture. The default
•
value is Off.
OFF
•
630
Change the pan rotation of the fixture from the
•
default setting of 540 degrees to 630 degrees.
540
•
Turn on or off the encoder feedback for pan and tilt
movement. You may want to turn off encoders when
ON
•
working on a fixture so that you can move pan and
OFF
•
tilt without the fixture automatically moving back to
position.
Set the speed (scan mode) of pan and tilt move-
ment. The default value is 1. Use this parameter to
1–4 make fine adjustments to pan and tilt movement in
order to correct for mis-stepping when the fixture is
installed on its side (side-hung, or "Outrig").
Hibernation mode forces the LEDs and stepper
OFF
motors to power off when the fixture loses DMX con-
•
trol signal for a set period of time. The default time
1–99 minutes
•
setting is 15 minutes.
Set when the Defogger (heater for the front lens) is
turned on:
Defog OnOP
•
•
Defog OnPwr
•
Defog Off
•
•
•
Standard
Set the dimming curve. The default value is Stand-
•
ard.
Theatrical
•
Turn on when the fixture is installed on its side (side
ON
hung, or "Outrig"). This parameter reduces the
•
speed of pan and tilt movement to correct for mis-
OFF
•
stepping.
Description
Defog OnOP: Turn on Defogger when LEDs are
above 0% intensity
Defog OnPwr: Turn on Defogger when the fixture
is powered (default value)
Defog Off: Turn off Defogger
17