High End Systems Shapeshifter C1 User Manual page 57

CHAPTER 6
General Maintenance and Troubleshooting
For other lighting consoles use the following steps:
1. Set the fixture to Enhanced Mode in the menu system. Then, at the controller:
2. Set channel 5 [Master LED X/Y Function] to DMX value 255
3. Adjust Channels 29, 30, 37, 38, 45, 46, 53, 54, 61, 62, 69 and 70 [X/Y Function on
the modules] so that they are convergent
4. Set Channel 20 [Control] to DMX value 96 for 3 seconds
5. Set Channel 20 [Control] to DMX value 0. The module will home
6. Clear your Programmer, the modules will now all be aligned.
SHAPESHIFTER User Manual 47