Preset Programming Overview; Navigating To The Preset Menu - High End Systems Shapeshifter C1 User Manual

Chapter 4:
Preset Programming
SHAPESHIFTER fixtures can be programmed through the onboard menu
system using Preset Programming. This section describes how to program
your fixtures for stand-alone operation using the on-board memory in each
fixture to create and store scenes.

Preset Programming Overview

Presets are built from combining scenes into programs and then assigning the programs to
Program Partitions for playback by a fixture designated as the Master and, if desired, groups of
slave fixtures assigned to a Program Partition. SHAPESHIFTER fixtures ship with factory
programmed scenes and programs ready for you to use or edit.
Creating presets consists of performing the following steps:
• Designating a fixture as the Master
• Selecting/Editing Scenes
• Sequencing Scenes into Programs
• Sequencing Programs into Program Partitions
• Configuring slave fixtures on the link to playback a Program Partition from the
master

Navigating to the Preset Menu

To enter the Preset Menu:
1. Press the MODE/ESC button to enter the first level of the menu system. The display will
MODE
/ ESC
show Address and Info as the first two options in the top menu level.
*
The red star indicates the current menu.
2. Using the
3. Press the button to select.
SHAPESHIFTER User Manual
buttons, scroll to Preset.
CHAPTER 4
Preset Programming
29