Set Input By Out; Edit Program - High End Systems Shapeshifter C1 User Manual

Set Input by Out

This Scene Edit option allows you to capture the parameter values for a scene from DMX input into
the fixture. Once you create a look from a DMX console do the following:
1. Navigate to and select the Preset menu as shown on page 31.
2. Use the
3. Use the
press to select.
4. Use the
5. The scene will record the current parameter values being input via DMX.
6. When you are finished capturing DMX into a scene, press

Edit Program

This preset menu option lets you select from 10 factory set programs to edit. You can set up to 64
Scenes in a sequence of Steps for each program. You can also test the program at any time by
selecting Program Test to playback the program as it is currently defined.
To edit a program:
1. Navigate to and select the Preset menu as shown on page 31.
2. Use the
3. Use the
to select.
4. Use the
Step 64 and press
that step.
5. Use the
and press to select.
6. When you have assigned all the steps you want, select End and press
program.
SHAPESHIFTER User Manual
buttons to scroll to the Edit Scenes option and press
buttons to scroll to the Scene number you wish to build on from 1-250 and
button to scroll to the Input by Out and press
buttons to scroll to Edit Prog. menu and press
buttons to scroll to a program from Program 1–Program 10 and press
buttons to scroll to the Step in the program you want to edit from Step 1 to
to select. The display will show which scene is currently assigned to
buttons to scroll to the scroll to the scene you want to assign to the step
CHAPTER 4
Preset Programming
to select.
to select.
to return to the main menu.
to select.
to save the
33