Furuno GS-100 Operator's Manual page 89

5. Set a cosmetic cap to each fixing hole on the front panel. See "How to set the cos-
metic caps and alarm lid assembly" on page 8-22.
Desktop or table underside mount
The display unit can be mounted on a desktop or on the underside of a table using the
optional bracket. See the outline drawing for details.
Bracket Assembly with Knobs (Type: OP26-8, Code No.: 000-016-313))
Name
Tapping screw
Binding head screw
Bracket assembly
1. Remove the hanger fixing plates from the hanger assembly.
2. Fasten the hanger fixing plates to the
display unit from the left side and right
side with four binding head screws
(M5×12).
3. Make four pilot holes for tapping screws
(5×20) in the mounting location.
4. Fix the hanger to the mounting location
with four tapping screws (5×20).
5. Screw knobs into the display unit loose-
ly.
6. Set the display unit to the hanger.
7. Tighten the knobs to fasten the hanger to the display unit.
8. Set a cosmetic cap to each fixing hole on the front panel.
Fixing hole (4-ø7)
Type
5×20 SUS304
M5×12 SUS304
OP26-8-1
Hanger
fixing
plate
(left
side)
190±0.5 (7.48")
288±5 (11.34")
240 (9.45")
8. INSTALLATION
Code No.
000-171-997-10
000-171-999-10
001-081-920
51±5 (2.01")
149 (5.87")
91 (3.58")
Qty
4
4
1
Screw
(M5x12)
8-21