Furuno GS-100 Operator's Manual page 5

Safety Instructions for the Installer
WARNING
Have a qualified serviceman do the
installation.
Only qualified personnel should work
inside the equipment.
Turn off the power at the
switchboard before beginning the
installation.
Fire or electrical shock can result if the
power is left on.
Use the specified power cable.
Fire can result if an incorrect cable is
used.
Be sure that the power supply is
compatible with the voltage rating
of the equipment.
Connection of an incorrect power
supply can cause fire or damage the
equipment.
SAFETY INSTRUCTIONS
CAUTION
Ground the equipment to prevent
electrical shock and mutual
interference.
The mounting location for the units
must satisfy the following
conditions:
- Away from rain and water splash
- Out of direct sunlight
- Away from air conditioner vents
- Moderate and stable in temperature
and humidity
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Type
Antenna
GS-1001
Unit
Display
GS-1002
Unit
Junction
GS-1003
Box
Display
DS-600
Unit
(option)
Standard Steering
compass compass
0.70 m 0.45 m
0.60 m 0.40 m
0.75 m
0.50 m
0.60 m
0.40 m
iii