Notices; Audio Notice Type; Ship Speed Notice - Furuno GS-100 Operator's Manual

4.

NOTICES

There are two notice conditions which generate both audio and visual notices: Ship
Speed and Trip. When the conditions of a notice are met, the buzzer sounds according
to the notice sound setting and the icon related to the notice turns from gray to blue at
the top right-hand corner of the display.
You can silence the buzzer by pressing the ACK key.
4.1

Audio Notice Type

You can select the audio notice type as follows. When the conditions of a notice are
met, the icon color related to the notice changes regardless of the audio notice type.
1. Press the MENU ESC key to open the main menu.
2. Select [2 Speed/Trip Setting]
then [4 Sound].
3. Select [1 Notice Sound].
4. Select [1 Off], [2 On] or [3 Continuous].
[Off]: No sound, only visible notice (an icon turns blue)
[On]: Three long buzzer and visible notice (an icon turns
blue)
[Continuous]: This buzzer sounds until the ACK key is pressed (to acknowledge
the notice). Visible notice (an icon turns blue).
5. Press the MENU ESC key to close the main menu.
4.2

Ship Speed Notice

The ship speed notice alerts you when own ship's speed is lower or higher than the
speed setting or within the range set.
1. Press the MENU ESC key to open the main menu.
Notice icons
: Trip
: Speed
4-1