Furuno GS-100 Operator's Manual page 27

then press one of keys from 0 to 9.
[1. Direction]: Set the direction for translatory movement.
[2. SOG]: Set the speed for translatory movement in kn.
[3. Direction]: Select the direction for rotary motion from [CW] (clockwise) and
[CCW] (counterclockwise).
[4. Radius]: Set the radius for rotary motion in NM.
[5. Angular Speed]: Set the angular speed for rotary motion.
5. Move the cursor to [Enter] then press the ENT key.
6. Select [2 Attitude Setting].
7. Enter each setting with the numeric keys.
[6. Heading Amplitude]: Set the amplitude for the heading.
[7. Heading Angular rate]: Set the angular rate for the heading.
[8. Pitch Amplitude]: Set the amplitude for bow and stern sway of own ship.
[9. Pitch Angular rate]: Set the angular rate for bow and stern sway of own ship.
[10. Roll Amplitude]: Set the amplitude for port and starboard sway of own ship.
[11. Roll Angular rate]: Set the angular rate for port and starboard sway of own
ship.
[12. Amplitude]: Set the amplitude for heave.
[13. Frequency]: Set the frequency for heave.
8. Move the cursor to [Enter] then press the ENT key.
9. Select [3 Output Status].
10. Select a mode for NMEA output in demo mode.
11. Select [4 Demo Start]. The confirma-
tion message appears.
12. Select [1 Yes]. The equipment restarts.
3. SETTINGS
3-5