Berthing Display; Berthing Display Overview - Furuno GS-100 Operator's Manual

6.

BERTHING DISPLAY

You can prepare and edit berthing lines on the GS-100 and send them to the optional
display unit DS-600 for display on the unit. For installation details, see section 8.6.
6.1

Berthing Display Overview

The berthing display shows ship's track (past and/or predicted) and provides help with
berthing operations. With position and heading inputs, customizable berthing lines can
be shown to help in berthing.
All berthing lines within the current display range are automatically shown.
The display orientation is available in Head-up and North-up. Head-up has your head-
ing at the screen top and North-up has North at the top.
The navigation data, which appears at the left side of the display, can be shown or hid-
den as necessary.
The 3-axis speed display shows ship's speed in three axes: transverse speed at the
reference point, longitudinal speed, and transverse speed at the reference point.
1
Heading*
ROT source* 2 ,
ROT
3
Doppler sonar*
SOG(STW)
Doppler sonar* 3
COG
Current* 3 (tide) speed,
direction
Wind reference* 3
wind speed
wind angle
Depth
Name of berthing line
*1: Requires heading data. If there is no heading data,"--" appears and the ▲mark
and "NSEW" (indicates the azimuth) are not shown.
*2: ROT: Heading data is required only for [EXT HDG].
*3: These data can not be displayed in the GS-100.
*4: Ground tracking: Green, Water tracking: Blue
Berthing
Position
line
Predicted
position marker
(purple)
Tracking mode monitor*
Tracking mode
Time
Speed vector
(black dashed line)
Range/Display orientation
(N UP, H UP)
4
3-axis speed display
Transverse speed at
reference point
Longitudinal speed
Transverse speed at
reference point
1
Past position marker*
Ground tracking: light green
Water tracking: light blue
1
Track* (solid line)
Stern track: black
4
Ref. pos. track: green*
1/4
Own ship marker*
(current position)
6-1