Antenna Unit - Furuno GS-100 Operator's Manual

Fabrication
TTYCS-1
8.3.3

Antenna unit

Notes about the T-connector
• The terminator is supplied with being connected to the device net cable. Unfasten
them then connect the T-connector between them.
Terminator Terminator
• Wrap the T-connector and connected cables with self-bonding tape and vinyl tape
(supplied) for waterproof.
MJ-A10SPF0016-010C MJ-A10SPF0016-010C
Terminator Terminator
T-connector T-connector
NC-050505-FMF-TS00 NC-050505-FMF-TS00
Arbitrary length Arbitrary length
Sheath Sheath
ANT-DN18WAPVC- ANT-DN18WAPVC-
300/400/500 300/400/500
: Wrap self-bonding tape
once over vinyl tape.
35 mm 35 mm
Vinyl tape Vinyl tape
Vinyl tape Vinyl tape
Wind the shield. Wind the shield.
T-connector T-connector
NC-050505-FMF-TS00 NC-050505-FMF-TS00
ANT-DN18WAPVC-300/400/500 ANT-DN18WAPVC-300/400/500
: Wrap vinyl tape once.
: Wrap vinyl tape twice
over self-bonding tape.
8. INSTALLATION
100 mm 100 mm
7 mm 7 mm
8-13