Gnss Menu; How To Select The Positioning System; How To Set The Positioning Condition - Furuno GS-100 Operator's Manual

3. SETTINGS
3.5

GNSS Menu

3.5.1

How to select the positioning system

1. Press the MENU ESC key to open the main menu.
2. Select [6 Sensor Setting] then
[2 GNSS].
3. Select [1 Method].
4. Select [1 GPS].
Note: Other positioning systems will be available in the future.
5. Press the MENU ESC key to close the main menu.
3.5.2

How to set the positioning condition

Satellite elevation
You can set the minimum elevation of satellites to use to fix position. This function is
reserved for future use.
Disable satellite
Every GPS satellite is broadcasting abnormal satellite number(s) in its Almanac,
which contains general orbital data about all GPS satellites. Using this information, the
GPS receiver automatically eliminates any malfunctioning satellite from the GPS
satellite schedule. However, the Almanac sometimes may not contain this information.
You can disable an inoperative satellite manually. Enter satellite numbers (up to three
satellites) in three digits.
1. Press the MENU ESC key to open the main menu.
2. Select [6 Sensor Setting] then [2 GNSS].
3. Select [2 Condition].
4. Select [2 Not used GPS].
5. Enter the satellite numbers (setting range:
1 to 32) with the numeric keys.
6. Move the cursor to [Enter] then press the
ENT key.
7. Press the MENU ESC key to close the
main menu.
3-6