Equipment Id; Correction Menu - Furuno GS-100 Operator's Manual

8. INSTALLATION
Summer time
Note: This menu is available when selecting [Local] in the [Local Time] menu.
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [1 System].
3. Select [5 Summer Time].
4. Select [1 On] to use summer time.
5. Press the MENU ESC key to close the main menu.
8.4.6

Equipment ID

The equipment ID is identification for system.
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then
[2 Network].
3. Select [2 Equipment ID].
4. Enter the ID with the numeric keys.
5. Move the cursor to [Enter] then press the
ENT key.
6. Press the MENU ESC key to close the
main menu.
8.4.7

Correction menu

Heading, Pitch or Roll offset
You may apply an offset to the heading, pitch, roll and position to further refine their
accuracy.
1. Press the MENU ESC key to open the main menu.
2. Select [6 Sensor Setting] then
[1 Correction].
3. Select [1 HDG Offset], [2 Pitch
Offset] or [3 Roll Offset]. After entering the
password, the following setting window
appears.
Note: The [HDG Offset] menu can only be
set by a serviceman.
8-16