Trip Notice - Furuno GS-100 Operator's Manual

4. NOTICES
2. Select [2 Speed/Trip Setting] then [1 Ship Speed].
3. Select [2 In] or [3 Out]. The ship speed notice icon (
in gray at the top right-hand corner of the display.
[In]: The notice alerts you when own ship's speed is within the
range set.
[Out]: The notice alerts you when own ship's speed is lower or
higher than the range set.
4. Select [1 Ship Speed].
5. Select [4 Speed].
6. Enter the minimum and maximum speeds
with the numeric keys.
Note: When the settings for minimum and
maximum are equal, the notice alerts you
when own ship's speed matches the set-
ting, or is higher than the setting for [2 In]
or lower for [3 Out].
7. Move the cursor to [Enter] then press the ENT key.
8. Press the MENU ESC key to close the main menu.
To turn off the ship speed notice, select [1 Off] at step 3.
4.3

Trip Notice

The trip notice alerts you when own ship has traveled the preset trip distance.
1. Press the MENU ESC key to open the main menu.
2. Select [2 Speed/Trip Setting]
then [2 Trip].
3. Select [2 Range].
4. Enter the trip distance with the numeric
keys.
5. Move the cursor to [Enter] then press the
ENT key.
6. Select [3 Notice].
7. Select [2 On] to turn on the trip notice. The trip notice icon (
appears in gray at the top right-hand corner of the display.
8. Select [1 Calculation].
9. Select [2 Start/Restart]. The system starts the trip
calculation.
10. Press the MENU ESC key to close the main menu.
To turn off the trip notice, select [1 Off] at step 7.
4-2
) appears
)