Furuno LH3000 Operations And Information Quick Manual
Loud hailer marine
Hide thumbs
Also See for LH3000:
- Operator's manual (38 pages) ,
- Installation manual (3 pages) ,
- Quick manual (2 pages)
Advertisement
LH3000 Loud Hailer Operations and Information Quick Guide
Specifications: 13.6 VDC (+/-20%), < 5A (30w), < 280mA (standby), ext. speaker 4.5W @ 4 ohms (temperature rating -15 to 55°C)
12
Control Descriptions
1
[Hail Select] Key - Selects loud hailer speaker to use (ALL, FWD, AFT, BOTH).
2
[Intercom Select] Key - Selects which intercom station (IC1, IC2, IC3, IC4) to call.
3
[Upper Signal Select] Key - Selects warning signal among YELP, UNWY, SAIL and TOW.
4
[Lower Signal Select] Key - Selects warning signal among MAN, STOP, ANCH and AGND.
5
[DIM] Key - Adjusts indicator backlighting, press key cyclically to set one of five levels, including off.
6
[AUX] Key - Transmits audio signal from external source to all intercom stations.
7
[FUNC] Key - Activates automatic and manual warning signals.
8
[LISTEN VOL] Control - Adjusts listening volume from the internal speaker; turns power on/off.
9
[HAIL VOL] Control - Adjusts output volume from the horn speakers or intercom station speakers.
10 LED Indicators - From top row:
- Hail indicators (
- Intercom indicators (
- Alarm signal indicators
-
and
FUNC/PTT
- Alarm signal indicators
11 MIC - Microphone input
12 Speaker
Powering On/Off
Rotate the [LISTEN VOL] control clockwise to power on.
The "ALL" indicator lights to confirm standby.
Always return to standby mode after a function has been completed.
The "standby mode" allows the following: Ready to call all stations, including both horn speakers and all
intercom stations, and also ready to receive a call from any intercom station.
Sounding Warning Signals: The "two" manual signals, YELP and MAN, sound at each press of the PTT switch.
The "six" automatic signals are sounded when the [FUNC] key is operated.
Only the horn speakers sound warning signals and volume is automatically set to maximum.
4 3 2
11
ALL, FWD, AFT BOTH
)
IC1 – IC4
YELP (manual), UNWY, SAIL, TOW
indicators
AUTOMATIC
MAN (manual), STOP, ANCH, AGND
and other important notes!
LH3000 Loud Hailer Operations and Information Quick Guide
1
10
8
)
5
6
9
GP Page 1
7
11/18/2004
Advertisement
Table of Contents
Related Manuals for Furuno LH3000
Summary of Contents for Furuno LH3000
- Page 1 LH3000 Loud Hailer Operations and Information Quick Guide Specifications: 13.6 VDC (+/-20%), < 5A (30w), < 280mA (standby), ext. speaker 4.5W @ 4 ohms (temperature rating -15 to 55°C) 4 3 2 Control Descriptions [Hail Select] Key - Selects loud hailer speaker to use (ALL, FWD, AFT, BOTH).
- Page 2 [HAIL VOL] control; release the PTT switch and the Loud Hailer will switch to the listening mode, using the speaker(s) as microphone(s). If necessary, adjust listening volume with the [LISTEN VOL] control. 3. Press the [Hail Select] key to return to the standby mode. LH3000 Loud Hailer Operations and Information Quick Guide GP Page 2 11/18/2004...
Need help?
Do you have a question about the LH3000 and is the answer not in the manual?
Questions and answers